Linux satellite receiver with harddisk drive in silver or black edition.
Product information
- LINUX O/S (IBM´s PowerPC 405, 64 MB SDRAM)
- Smart Card reader (X-Crypt CAS, Firecrypt CAS )
- Harddisk Drive
- Ethernet 10/100 , RS232 connection support
- Software upgrade trought internet
- Application and Expansion
- LINUX O/S enables ultimate applications and expansions to fulfill the customer’s need
- Receiver is supplied in full configuration, after turning on is ready for use without any software upgrade.
- Full graphical OSD menu
- User friendly interface
- DiSEqC 1.0, 1.1 switches and DiSEqC 1.2 driving motors, USALS control supported
- Enhanced Search Channel Option:
- Search by all satellite
- Search by satellite/ network
- Search by all TP scanningSupport fast TXT (250 TXT pages in memory)
- Digital optical output SPDIF with AC3 supported
- Smart EPG
- Automatically updates Program Info
- EPG shows all Satellites’ Program Guide
- Search programs by Genre on the EPG
- Enhanced timer setting/ EPG
- Modification settings and devices in PC
- Ethernet 10/100 port supported. Possibility to connect receiver to Internet and interface receivers through LAN , automatic identification and configuration of network connection
- Possibility of automatic software upgrade through Internet
Specifications
- MPEG-2 PSI, DVB-S, and DVB-SI
- Fast & Easy to use OSD
- Set all values for searching programs in one menu page
- Satellite List by exclusive RCU button
- Subtitle & Teletext (OSD)
- Aspect Ratio: 4:3, 16:9
- LINUX open source(some parts under the terms of GPL, accordingly expandable)
- 10,000+ Channels Programmable
- Powerful Channel Sorting and Grouping
- Favorite Channel Lists for TV
- Parental Control & Radio and Video Mode
- "ETHERNET SUPPORTED" and external PSTN modem(dial up modem) supported
- 3.5” HDD or 2.5” HDD available
- and inner side of top cover mounted style
- CVBS, RGB, YUV, S-video supported
- Variable HDD Size is Applicable
- Multi Time Shifting Function - Unlimited trick play on any of Real Time Live Programs/ Recording Program/ Playback on
- Prerecorded Program
- Improved Features
- Powerful IBM Power PC implemented
- Faster CPU performance : 350MIPS(252MHz)
- Dolby AC-3 (SPDIF output for High-Fi Audio)
- Faster channel change time between different TPs. (less then 1sec)
- Improved tuner sensitivity for high quality and better reception.
- Additional OSD language available. User friendly larger font size.
- Faster response between Remote Control Unit via STB
Hardware Specification
| Part | Type | Specification | |
| CPU | Type | IBM’s PowerPC405 | |
| Speed | 350 MIPS | ||
| Data/Instruction Cache | 16KB/16KB | ||
| Tuner
| Input Connector | IEC169-24 female(F-type) | |
| Loop through Connector | IEC169-24 female(F-type) | ||
| Input Signal Level | -65 to -25dBm | ||
| Frequency Range | 950MHz to 2150MHz | ||
| Loop through Out Impedance | 75 ohms nominal | ||
| Waveform | QPSK(C/KU band compatible) | ||
| 22KHz Tone | Frequency | 22±4KHz | |
| Amplitude | 0.6±0.2V | ||
| Symbol Rate | QPSK( up to 45MS/s) | ||
| LNB Control | Band selection | 22 KHz tone | |
| Switch | DiSEqC 1.0, 1.1, 1.2, USALS | ||
| Polarization | 13/18V (400mA Max/per each) | ||
| MPEG Transport Stream & A/V Decoding | Transport Stream | ISO/IEC 13818-1 Specification | |
| Aspect Ratio | 4:3, 16:9 with pan vector | ||
| Video Resolution | 720 x 576(PAL) or 720 x 480(NTSC) | ||
| Audio Decoding | MPEG-1 Audio Layer 1,2 | ||
| Network | Ethernet | RJ-45(10Base-T/100Base-TX) | |
| Memory | Flash Memory | Up to 8MB | |
| SDRAM | 64MB | ||
| Conditional Access System | Smartcard | 1 slot(Xcrypt, Firecrypt embedded) |
| A/V & Data In/Out | TV SCART | 1 x SCART |
| VCR SCART | 1 x SCART | |
| RCA | Video x 1, Audio x 2 | |
| Data Interface | 9 Pin D-Sub, PSTN dial up MODEM | |
| Power Supply | Input Voltage | AC220V, 50Hz /or AC110V, 60Hz |
| Power Consumption | 25W max. (Under 7W max. at stand-by mode) | |
| Physical Specification | Size (W x H x D) | 300mm x 58mm x 235mm |
| Weight | About 2 .0kg |